ClareControls CH-THSTAT-W Guia do Utilizador descarregar pdf (Página 10)

4 amp.1640 User Guide

Rack mounting the amp.1640 amplifier

Your amp.1640 comes with equipped for mounting the unit in a 1U rack space.

Notes

• Be sure that the unit is in a well-ventilated area that provides adequate

cooling.

• Do not block the fan vent located on the rear of the unit.

• Do not place the unit on carpeting or any similar material.

• Do not install the unit near a source of heat, or in an extremely humid or wet

location.

• If your installation lacks good airflow (such as solid cabinet doors or wall-

mounted racks), it may be necessary to create ventilation to allow outside air

into the space.

To mount the amp.1640 in a rack:

1. Remove the eight screws (four on each side) from the

amp.1640 and set aside.

2. Place an ear on each side of the amp.1640, and then attach them using the

screws you set aside.

3. Slide the unit into the rack, and then attach it with four rack mounting screws.

Figure 1: amp.1640 rack mounting

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17

Sem comentários

ClareControls CH-THSTAT-W Guia do Utilizador Página 10