ClareControls CH-THSTAT-W Manual do Utilizador descarregar pdf

DCN: 2012-11-222-1 Page 1

™

Installation Guide

Model CH-THSTAT-W

This thermostat is compatible with most HVAC systems, including the following:

• 24VAC systems Note: requires both the 24R and 24C (common) wires

• Standard gas/oil/electric heating systems

o 1 stage heating and cooling

o 2 stage heating and cooling

• Heat Pump systems:

o 1 stage heating and cooling

o 2 stage heating and cooling

o 2

or 3

stage Auxiliary heating (heat strips)

• Do NOT use for line voltage controls (120/240VAC)

Stop! Before removing your existing thermostat be sure to label the wires with the wiring

labels included. Label the wires as they were connected to the old thermostat terminals

and record them below.

We strongly recommend you take a picture of your existing thermostat wiring

connections. This will enable you to reconnect your old thermostat if you encounter a

problem installing the CH-THSTAT-W and will assist in trouble shooting the installation, if

needed.

CAUTION: The typical wire colors noted below may be different from your installation.

Standard HVAC System Wiring

Thermostat

Terminal Marking

Meaning

Typical Wire

Color

Record the old thermostat wire color

connected to this terminal here

24VAC Common

Blue

R (or RH)

24VAC Return (heating system)

Red

Fan

Green

W or W1

Heat stage 1

White

Y or Y1

Cool stage 1

Yellow

Heat stage 2

Orange

Cool stage 2

Black

Heat Pump HVAC System Wiring

Thermostat

Terminal Marking

Meaning

Typical Wire

Color

Record the old thermostat wire color connected

to this

terminal here

24VAC Common

Blue

24VAC Return

Red

Fan

Green

W or W1

Aux Heat

White

Y or Y1

Compressor stage 1

Yellow

O (or B*)

Change Over Valve

Orange

(brown*)

Compressor stage 2

Black

* if you have a terminal marked “B” with a brown wire attached to it, that means you have a changeover (C/O) with heating

type heat pump system. Be sure to set the change over type in the Installer Settings menu to C/O Type: w/Heat.

Otherwise leave it set to w/Cool.

1 2 3 4 5 6 7 8 9

Resumo do Conteúdo

Página 1 - Model CH-THSTAT-W

DCN: 2012-11-222-1

Página 2

DCN: 2012-11-222-1

Página 3

DCN: 2012-11-222-1

Página 4 - Installer Settings screen

DCN: 2012-11-222-1

Página 5

DCN: 2012-11-222-1

Página 6

DCN: 2012-11-222-1

Página 7 - Installer Settings Summary

DCN: 2012-11-222-1

Página 8

DCN: 2012-11-222-1

Página 9 - Heat Pump HVAC System Wiring

DCN: 2012-11-222-1

Mais documentos para Termóestatos ClareControls CH-THSTAT-W

Para ver o documento ClareControls CH-THSTAT-W Guia de Instalação

ClareControls CH-THSTAT-W Guia de Instalação (19 páginas)

Para ver o documento ClareControls CH-THSTAT-W Especificações

ClareControls CH-THSTAT-W Especificações (5 páginas)

Para ver o documento ClareControls CH-THSTAT-W Manual do Utilizador

ClareControls CH-THSTAT-W Manual do Utilizador (14 páginas)

Para ver o documento ClareControls CH-THSTAT-W Guia do Utilizador

ClareControls CH-THSTAT-W Guia do Utilizador (92 páginas)

ClareControls CH-THSTAT-W Guia do Utilizador (17 páginas)

Comentários a estes Manuais

Sem comentários

ClareControls CH-THSTAT-W Manual do Utilizador

Consulte online ou descarregue Manual do Utilizador para Termóestatos ClareControls CH-THSTAT-W. Installation Guide Model CH-THSTAT-W Manual do Utilizador

Resumo do Conteúdo

Mais documentos para Termóestatos ClareControls CH-THSTAT-W

Comentários a estes Manuais

Manuais e produtos relacionados com Termóestatos ClareControls CH-THSTAT-W