ClareControls CH-THSTAT-W Guia do Utilizador descarregar pdf (Página 36)

28 Clare Controls IP Network Camera User Guide

2. Select the Time Zone.

3. Select the checkbox to enable the NTP function.

4. Configure the following settings.

 Server Address: IP address of the NTP server.

 NTP Port: Port of the NTP server.

 Interval: The time interval between the two synchronizing actions of the NTP.

Note: If the camera is connected to a public network, use an NTP server that has a

time synchronization function. If the camera is set in a customized network, the NTP

software can be used to establish an NTP server for time synchronization.

To change Time Synchronization manually:

1. Enable the Manual Time Sync function, and then click to set the system time

from the pop-up calendar.

Note: You can select the Sync with computer time checkbox to synchronize the time

of the camera with that of your computer.

2. Click Save.

3. Click the DST tab page to enable the DST function, and then set the date of the DST

period.

4. Click Save.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 91 92

Sem comentários

ClareControls CH-THSTAT-W Guia do Utilizador Página 36