ClareControls CH-THSTAT-W Guia do Utilizador descarregar pdf (Página 72)

64 Clare Controls IP Network Camera User Guide

2. Select the Enable Record Schedule checkbox to enable scheduled recording.

3. Set the recording parameters of the camera.

Pre-record: This is the time you set to start recording before the scheduled time for

the event. For example, if an alarm triggers recording at 10:00, and the pre-record

time is set as 5 seconds, the camera starts to record at 9:59:55.

The Pre-record time can be configured as No Pre-record, 5 seconds, 10 seconds,

15 seconds, 20 seconds, 25 seconds, 30 seconds, or not limited.

Post-record: The time you set to stop recording after the scheduled time for the

event. For example, if an alarm triggered recording ends at 11:00, and the post-

record time is set as 5 seconds, the camera records until 11:00:05.

The Post-record time can be configured as 5 seconds, 10 seconds, 30 seconds,

1 minute, 2 minutes, 5 minutes, or 10 minutes.

Note: The record parameter configurations vary depending on the camera model.

4. Click Edit to edit the record schedule.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 91 92

Sem comentários

ClareControls CH-THSTAT-W Guia do Utilizador Página 72