ClareControls CH-THSTAT-W Guia do Utilizador descarregar pdf (Página 50)

42 Clare Controls IP Network Camera User Guide

BLC area: BLC area is the sense of the light intensity; Close, Up, Down, Left, Right,

and Center are selectable.

White balance: The below figure shows the white balance options. Select according

to the real condition. For example, if there is a fluorescent lamp in the surveillance

scene, select the white balance type as Fluorescent Lamp.

Digital noise reduction: Close, Normal, and Expert Mode are selectable.

Noise reduction level: Adjusts the noise reduction level. This is only valid when the

DNR function is enabled.

Scene mode: Select indoor or outdoor.

HLC: The high light compression function can be used when there are strong lights

in the scene which affect the image quality.

Grey Scale: You can choose the range of the grey scale as [0 to 255] or

[16 to 235].

Corridor mode: To use of the 16:9 aspect ratio, enable the corridor mode when you

use the camera in a narrow view scene.

Note: When installing, turn the camera to the 90 degrees or rotate the 3-axis lens to

90 degrees, and then set the corridor mode as on. You will get a normal view of the

scene with 9:16 aspect ratio.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 91 92

Sem comentários

ClareControls CH-THSTAT-W Guia do Utilizador Página 50