ClareControls CH-THSTAT-W Guia do Utilizador descarregar pdf (Página 39)

Clare Controls IP Network Camera User Guide 31

2. Select the Enable PPPoE checkbox to enable this feature.

3. Enter User Name, Password, and Confirm the password for PPPoE access.

Note: The User Name and Password is assigned by your ISP.

4. Click Save.

5. When prompted, reboot for the settings to take effect.

Configuring DDNS settings

If your camera is set to use PPPoE as its default network connection, you can use the

Dynamic DNS (DDNS) for network access.

Registration on the DDNS server is required before configuring the DDNS settings of

the camera.

To configure CVDDNS settings:

1. Enter the CVDDNS Settings interface.

Configuration > Camera Configuration > Network > CVDDNS

2. Select the Enable CVDDNS checkbox to enable this feature.

3. Select CVDDNS Type.

To configure CVDDNS:

1. Enter Server Address of CVDDNS (e.g. myclarevision.com).

2. In the Domain text field, enter the domain name obtained from the website.

3. Enter the Port of CVDDNS server.

4. Enter the User Name and Password registered on the CVDDNS website.

5. Click Save.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 91 92

Sem comentários

ClareControls CH-THSTAT-W Guia do Utilizador Página 39